Dolo Acrylic Distemper

Specification:

Application Data Tools Brush/Roller/Spray (*Conventional Spray)
*Spraying - Air Pressure 2.75 to 3.5 Kgs/sq. cm
Thinning Potable Water
Thinner ratio 2 parts of water to 3 parts of distemper by weight
Technical Data Finish Matt
*Coverage 180-200 sq. ft./ Kg
*When applied to smooth surface free from dust, loose particles and loose plasters. Performance may vary due to factors such as method and condition of application, surface roughness and porosity.
Surface dry 30 min at 30°C ± 2°C & RH 60 ± 5%
Recoat time 4-6 hrs
Pack Size 1, 2, 5, 10 & 20 kg

Product description

Thick ready to use paste which imparts a strong durable foundation and reveals out the best performance from the finish paints.

Direction to use:

All the previous coatings of lime wash/ colour wash/ powder distemper should be completely scrapped off. For previously painted surface, remove all loose flaking particles and rub thoroughly with sand paper Ensure that the surface is clean and dry. Apply a coat of cement primer (water thinnable) and allow drying for 6-8 hrs. Add water slowly with constant stirring to the distemper paste until application consistency is attained. Normally 2 part of water would be added to 3 parts of distemper. Apply 2 to 3 coats either by brush/ roller/ spray keeping 6-8 hrs intervals between successive coatings.

Recommended usage:

Solo Acrylic Distemper is recommended for interior surfaces plasters, concrete/brickwork, and asbestos.

Dolo Acrylic Distemper