Dolo Bliss
home > Dolo BlissSpecification:
| Application Data | Tools | Brush/Roller/Spray (*Conventional Spray) *Spraying - Air Pressure 2.75 to 3.5 Kgs/sq. cm |
| Thinning | Potable Water | |
| Thinner ratio | 40-50% (Brush) / 50-60% (*Spray) *Spraying - Air Pressure 2.75 to 3.5 Kgs/sq. cm |
|
| Technical Data | Finish | Smooth & Matt |
| *Coverage | 1st coat- 230-260 sq. ft./ lit 2nd coat- 120-140 sq. ft./ lit *When applied to smooth surface free from dust, loose particles and loose plasters. Performance may vary due to factors such as method and condition of application, surface roughness and porosity. |
|
| Surface dry | 15 min at 30°C ± 2°C & RH 60 ± 5% | |
| Recoat time | 3-4 hrs | |
| Pack Size | 1, 4, 10, 20 litres |
Product description
Premium Acrylic Water based InteriorEmulsion Which Provide a smooth sheen finish to interior walls. It has a special formulation which imparts excellent durability to the paint film. It has low VOC, hence maintaining a healthy home. New plastered surface which have matured for at least three months should be free from loose plaster, dust and dirt particles. Remove dirt, dust, grease, loose flaking paint, algae and fungi by using suitable abrasive paper. Wipe it clean. The surface should be free from moisture. Apply a coat of Dolo Water Based Interior Primer and allow it to dry for 6-8 hrs. Level the dents with Solo Acrylic Wall Putty and make the surface uniform. Allow it to dry for 4-6 hrs. Apply another coat of Dolo Water Base Interior Primer and allow it to dry for 6-8 hrs. Then apply two coats of Dolo Bliss Pure Acrylic Interior Smooth Finish Emulsion by thinning 1 litre of paint with 450-500 ml of water. 5-6 hours gap should be given between two coats.
Performance and feature:
Rich matt finish Stain Guard Easy clean Low odour Fungus & mildew resistance
Recommended usage:
Dolo Bliss Pure Acrylic Interior Smooth Finish Emulsion is recommended for interior wall surfaces such as ceilings, bricks, asbestos and plasters etc.
