Dolo Grace
home > Dolo GraceSpecification:
| Application Data | Tools | Brush/Roller/Spray (*Conventional Spray) *Spraying - Air Pressure 2.75 to 3.5 Kgs/sq. cm |
| Thinning | Potable Water | |
| Thinner ratio | 50-60% (Brush) / 60-70% (*Spray) *Spraying - Air Pressure 2.75 to 3.5 Kgs/sq. cm |
|
| Technical Data | Finish | Smooth & Matt |
| *Coverage | 1st coat- 100-120 sq. ft./ lit 2nd coat- 40-60 sq. ft./ lit *When applied to smooth surface free from dust, loose particles and loose plasters. Performance may vary due to factors such as method and condition of application, surface roughness and porosity. |
|
| Surface dry | 30 min at 30°C ± 2°C & RH 60 ± 5% | |
| Recoat time | 4-6 hrs | |
| Pack Size | 1, 4, 10, 20 litres |
Product description
Water Based Exterior Acrylic Emulsion powered by first rated additives, especially designed for application on exterior walls in dry or moderately humid climate conditions.
Performance and feature:
Economical and durable Excellent resistant against algae and fungus growth Smooth and soft texture Low dust pick up Excellent adhesion Faster drying Good wall protection
Direction to use:
New plastered surface which have matured for at least three month should be free from loose plaster, dust and dirt particles. Remove dirt, dust, grease, loose flaking paint, algae and fungi by using suitable abrasive paper. Wipe it clean. The surface should be free from moisture. Apply a coat of Dolo Water Base Exterior Primer and allow it to dry for 6-8 hrs. Level the dents with Solo Acrylic Wall Putty and make the surface is uniform. Allow it to dry for 4-6 hrs Apply another coat of Dolo Water Base Exterior Primer and allow it to dry for 6-8 hrs. Then apply two coats of Dolo Grace Exterior Smooth Finish Acrylic Emulsion by thinning 1 litre of paint with 500-600 ml of water. 5-6 hours gap should be given between two coats.
Recommended usage:
Dolo Grace exterior emulsion is exclusively designed for application on exterior cement plasters, ceilings, asbestos sheet and concrete etc.
