Dolo Silk
home > Dolo SilkSpecification:
Application Data | Tools | Brush/Roller/Spray (*Conventional Spray) *Spraying - Air Pressure 2.75 to 3.5 Kgs/sq. cm |
Thinning | Potable Water | |
Thinner ratio | 50-60% (Brush) / 60-70% (*Spray) *Spraying - Air Pressure 2.75 to 3.5 Kgs/sq. cm |
|
Technical Data | Finish | Smooth & Matt |
*Coverage | 1st coat- 220-250 sq. ft./ lit 2nd coat- 120-140 sq. ft./ lit *When applied to smooth surface free from dust, loose particles and loose plasters. Performance may vary due to factors such as method and condition of application, surface roughness and porosity. |
|
Surface dry | 30 min at 30°C ± 2°C & RH 60 ± 5% | |
Recoat time | 3-4 hrs | |
Pack Size | 1, 4, 10, 20 litres |
Product description
Water Based Acrylic Emulsion which is made with the finest raw material. Dolo Silk offers a smooth and soft texture that is not slippery (also known as smooth matte finish) with excellent coverage and opacity.
Performance and feature:
Economical and durable Excellent resistant against fungus growth Smooth and soft texture Faster drying Good wash ability.
Direction to use:
New plastered surface which have matured for at least three month should be free from loose plaster, dust and dirt particles. Remove dirt, dust, grease, loose flaking paint, algae and fungi by using suitable abrasive paper. Wipe it clean. The surface should be free from moisture. Apply a coat of Dolo Water Base Interior Primer and allow it to dry for 6-8 hrs. Level the dents with Solo Acrylic Wall Putty and make the surface uniform. Allow it to dry for 4-6 hrs. Apply another coat of Dolo Water Base Interior Primer and allow it to dry for 6-8 hrs. Then apply two coats of Dolo Silk Interior Smooth Finish Acrylic Emulsion by thinning 1 litre of paint with 450-500 ml of water. 5-6 hours gap should be given between two coats.
Recommended usage:
Dolo Silk Interior Smooth Finish Acrylic Emulsion is recommended for interior wall surfaces such as ceilings, bricks, asbestos and plasters etc.