Solo Premium Finish
home > Solo Premium FinishSpecification:
Application Data | Tools | Brush/Roller/Spray (*Conventional Spray) *Spraying - Air Pressure 2.75 to 3.5 Kgs/sq. cm |
Thinning | Potable Water | |
Thinner ratio | 10-20% (Brush) / 20-30% (*Spray) |
|
Technical Data | Finish | Smooth & Matt |
*Coverage | 1st coat- 230-260 sq. ft./lit
*When applied to smooth surface free from dust, loose particles and loose plasters. Performance may vary due to factors such as method and condition of application, surface roughness and porosity. |
|
Surface dry | 15 min at 30°C ± 2°C & RH 60 ± 5% | |
Recoat time | 3-4 hrs | |
Pack Size | 1, 4, 10, 20 litres |
Product description
Premium All In 1 Semi Glossy Water Thinnable Enamel Provide a rich Satin / Semi glossy finish with excellent wash ability and excellent stain resistance. It is ideal for Wood, Metal and Wall.
Performance and feature:
Lower Stain Pick Up Excellent Wash ability All In 1 Technology (WOOD | METAL | WALL) Ultra Low odour
Direction to use:
New plastered surface which have matured for at least three months should be free from loose plaster, dust and dirt particles. Remove dirt, dust, grease, loose flaking paint, algae and fungi by using suitable abrasive paper. Wipe it clean. The surface should be free from moisture. Apply a coat of Dolo Water Based Interior Primer and allow it to dry for 6-8 hrs. Level the dents with Dolo Acrylic Wall Putty or Dolo Wall Grip powder putty and make the surface uniform. Allow it to dry for 4-6 hrs. Apply another coat of Dolo Water Base Interior Primer and allow it to dry for 6-8 hrs. Then apply two coats of Premium All In 1 Semi Glossy Water Thinnable Enamelby thinning 1 litre of paint with 200-250 ml of water. 4-5hours’ gap should be given between two coats.
Recommended usage:
Premium All In 1 Semi Glossy Water Thinnable Enamel is recommended for interior wall surfaces (such as ceilings, bricks, asbestos and plasters etc.), Metal and Wood.